Liquid Level Gauges | Aluminum Liquid Level Gauge

Aluminum Liquid Gauge with Card Thermometer with 3″ to 12″ Centerline

SPECIFICATIONS

Description

Aluminum Liquid Level Gauges are made of corrosion and rust resistant milled aluminum. The end pieces are permanently secured through a staking process. Fluid enters through a cross hole in the hollow lower bolt. The gauge is vented into the tank through the top bolt. The length between the center of the two bolts is referred to as the center line. Centerline measurements range from 3” to 36”. These gauges are available in a standard model, with dial thermometer, with card thermometer and with shutoffs. Liquid Level Gauges can be used on hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs. Their use can be extended to any industrial liquid level viewing application.
Aluminum Liquid Level Gauges are made of corrosion and rust resistant milled aluminum. The end pieces are permanently secured through a staking process. Fluid enters through a cross hole in the hollow lower bolt. The gauge is vented into the tank through the top bolt. The length between the center of the two bolts is referred to as the center line. Centerline measurements range from 3” to 36”. These gauges are available in a standard model, with dial thermometer, with card thermometer and with shutoffs. Liquid Level Gauges can be used on hydraulic reservoirs, gearboxes, bearing housings, crankcases, transformers and machinery oil reservoirs. Their use can be extended to any industrial liquid level viewing application.

SIMILAR PRODUCTS

Flexible Vinyl Liquid Gauge with Shut-Offs and NPT Adapters

B1565-300000BN

Specially Configured Aluminum Liquid Gauge

YB4494

Standard Steel Liquid Gauge with Straight Threads and Viton Seal

B1559-15000V