The Air Operated Spray Dispensers feed liquid to elevated, distant, or inaccessible points. The system consists of a central acrylic reservoir which dispenses liquid through one or more spray nozzles. These lubricators can be used to apply liquid to conveyors, chain drives, bull gears, trolley wheel bearings, wire rope, strip stock for punch presses, or any other application requiring a film of liquid. The amount of liquid sprayed is infinitely adjustable from a fine spray, invisible to the eye, to a coarse spray by adjusting the air pressure of the needle valve on the spray nozzle. Any liquid that flows can usually be sprayed, up to 1000 SSU viscosity at 100º F. The lighter the liquid, the easier it is to spray. Operation is simple. A normal air line of approximately 80 PSI is connected to a pressure regulator which reduces the pressure within the reservoir to any desired amount. This adjustable, reduced air pressure forces the liquid through piping to separate control valves for dispensing or spraying. Smooth control of liquid flow can be effected by pressure regulation and separate control valves, a desirable feature for conditions demanding fine adjustment. For best performance, a second regulator with suitable air capacity is supplied to adjust the air pressure to spray valves. Operation can be made automatic with two solenoid valves which can be activated by a motor drive or with a timer.
| Catalog Number | Capacity | C |
| *B-1267-1 | 1 Quart | 8-3/4 |
| *B-1267-2 | 1/2 Gallon | 12-1/4 |
| *B-1267-3 | 1 Gallon | 17-1/4 |
| *B-1267-4 | 2 Gallon | 30-1/4 |
*Special-Please Consult Factory
When Ordering Specify: Specifications:
Spray Valves have excellent, dependable performance in a compact design and are offered in
flat or round spray patterns. The spray valves minimize objectional fogging. Any
liquid that flows, up to a viscosity of 1000 SSU at 100º F., can be sprayed. The
spray valves are used for a multitude of applications such as lubrication of chains,
cables, gears, punches, dies, drills, taps, reamers, milling cutters, grinding wheels, sheet stock, die
casting molds --applying oil to feed products, water to embossing rolls of paper machinery,
etc. The amount of oil sprayed is infinitely adjustable from a fine spray, invisible to the eye,
to a coarse spray to suit most applications. When Ordering Specify: Specifications: Chain Lubrication
•Catalog Number
•Pressure...................................30
P.S.I. Maximum
•Temperature..............................160º F. Maximum
•Air Capacity ..............................5 C.F.M. at 20 P.S.I.
•Liquid Capacity
.........................3 G.P.H. at 10 P.S.I.
•Components..............................External Mounted
•Maximum Spray Valves..............4 (Sold Separately see below)
•Reservoir...................................Clear Acrylic
•Seals........................................Buna-N
•Covers.......................................Aluminum Alloy
Spray Valves
Catalog Number
Pattern
A
Type
A-2748-1
Round
2-11/16
Handwheel
A-3015-1
Flat
2-13/16
A-2748-2
Round
2-7/16
Tamperproof
A-3015-2
Flat
2-9/16
•Catalog Number
•Liquid Pressure..................5 P.S.I. Minimum
20 P.S.I. Maximum
•Air Pressure.......................5 P.S.I Minimum
20
P.S.I. Maximum
•Temperature.......................225º F. Maximum
•Body..................................Aluminum Alloy
•Seals.................................Buna-N
•Needle...............................Stainless Steel
•Nozzle...............................Brass
Air
PressureAir
CapacityPattern Size
A
B
C
D
10 P.S.I.
. 80 CFM
2-1/2
4-1/2
6-1/2
8-1/2
15 P.S.I.
1.00 CFM
3
6
7
9
20 P.S.I.
1.25 CFM
3-1/2
6-1/2
8-1/2
10-1/2
25 P.S.I.
1.50 CFM
4-1/2
7-1/2
10-1/2
12-1/2
