Circulating Oil System Specifications Sheet

(Read Only)

 

Company: Date:
Address:
City:                                            State:                 Zip:  
Contact Person: Date Due:
Phone:                                            Fax:
LUBRICATION INFORMATION
Oil Type and Name: Viscosity @ 100º F. SSU:
Gallons Per Minute: System Pressure:
Filtration Requirements
PUMP DISPENSER INFORMATION
Reservoir Capacity (GAL.):

Motor Type
Temperature Gage                ___Yes     ___No Open/Drip Proof___  Exp.Proof___  TENV/TEFC___
Temperature Switch             ___Yes     ___No Other Specifications:
Pressure Switch                   ___Yes     ___No

Available Current
Low Level Switch                ___Yes     ___No Voltage Frequency Phase
Flow Switch                         ___Yes     ___No
Needle Valves                      ___Yes     ___No
Differential Pressure Switch Across Filter (s)                                    ___Yes          ___No
Differential Pressure Gage (s) Across Filter (s)                                 ___Yes          ___No
Pump/Motor:              ___Single     ___Dual Special:
Line Filter:                  ___Single     ___Dual
Heat Exchanger:         ___Single     ___Dual

HEAT EXCHANGER INFORMATION
Heat Exchanger to Remove:                         B.T.U.'S/Hour

Water Cooled

Air Cooled
º F - Oil In º F - Oil Out º F - H2O Max. H2O PSI H2O GPM º F - Oil In  º F - Oil Out º F - Air Max
               
Temperature Controls:            ___Automatic            ___Manual            ___Furnished by Customer

IMMERSION HEATER INFORMATION
Minimum Oil Temp. Operating Oil Temp. Heat up Time Voltage & Frequency
       
Temperature Controls:            ___Automatic            ___Manual            ___Furnished by Customer

INSTALLATION ENVIRONMENT INFORMATION
Indoor     ___ Ambient Temperature Altitude Note all size Limitations
Outdoor  ___
Description of Equipment to be Lubricated, Including Number Points and Elevations and Return Line Elevation.

RETURN TO INFORMATION PAGE