Extremely dependable in performance with 360+ million cycles and provides the
ultimate in liquid
adjustability and output accuracy. PurgeX® with ultra micro output can be used with a wide range
of liquids or chemicals that demand critical flow control. It can be used for dispensing precise
quantities of liquid for food additives, applying adhesives in productions, inks, dyes, special
lubricants for oven conveyors, etc. industries such as Food, Medical, Printing, Chemical,
Agricultural, Plastic, Marine, Industrial Machinery, Packaging and Conveyors, are only a few which will greatly benefit by
using the PurgeX® 1/8" injector pump.
Operation is simple. Liquid is pulled from a reservoir to the PurgeX® injector pump due to vacuum
generated by pump. The reservoir location is not critical because the PurgeX® pump is a self-priming
injector that can operate in any orientation. With ultra-fine adjustability, the single piece
1/8" piston allows precise metering of very small volumes of liquid, maximum output is .0012 cubic
inches/.00066 ounces. Each clockwise turn of the integral calibration ring reduces output by .00026
cubic inches/.00014 ounces. High output pressures can be achieved due to a 25 to 1 ratio from air
inlet to liquid outlet. Pressures of 3000 PSI output can be achieved with 120 PSI air. The minimum
air pressure required is 40 PSI. "Oil-Rite The First Time™". DESIGNED AND MANUFACTURED IN THE USA
Patent Numbers 5,984,652 4,784,578 A
Catalog Number
No. of Feeds
DIM. (IN.)
Buna-N Seals
Viton® Seals
B3583-101
B3583-301
1
2
B3583-102
B3583-302
2
3-1/4
B3583-103
B3583-303
3
4-1/2
B3583-104
B3583-304
4
5-3/4
B3583-105
B3583-305
5
7
B3583-106
B3583-306
6
8-1/4
B3583-107
B3583-307
7
9-1/2
B3583-108
B3583-308
8
10-3/4
B3583-109
B3583-309
9
12
B3583-110
B3583-310
10
13-1/4
B3583-111
B3583-311
11
14-1/2
B3583-112
B3583-312
12
15-3/4
When Ordering Specify:
•Catalog Number
•Number of Feeds
•Air pressure.....................................40 PSI Minimum
•Body................................................Anodized aluminum alloy
•Seals...............................................Buna-N and Viton® Std.
•Temperature
....................................-15º F to 180º F
•Piston ratio.......................................25:1
•Piston diameter and stroke............... .125 diameter by .100 stroke (inches)
•Grease
Type.....................................Grade 00, 0, 1, 2