Reservoirs

OIL CUP

Oil Cups dispense liquid, by gravity, from a reservoir and are furnished without shutoff or control valves.  These dispensers are designed to serve as a central reservoir of an oiling system.  Shutoff valves and additional sight feed valves are needed for the regulation of liquid flow. Durable, shatterproof acrylic reservoirs are for temperatures below 160º F. Crystal clear pyrex or polycarbonate reservoirs are available for temperatures below 225º F.  They are also useful for many applications where it is desirable to visually inspect the presence and clarity of the liquid.  Self-closing filler caps are also provided.


Style D

                  
            Pipe Mounting                                   Remote Mounting

 
Catalog Number Capacity NPT A B C
Polycarbonate
B-1748-9 9 OZ. 1/4 male 2- 7/8 7/16 5-3/16
B-1748-10 3/8 male 1/2 5-3/8
B-1748-11 1/2 male 5/8 5-1/2
B-1748-12 1 PINT 1/4 male 3-5/8 7/16 6-13/16
B-1748-13 3/8 male 1/2 6-7/8
B-1748-14 1/2 male 5/8 6-13/16
B-1748-15 1 QT. 1/2 male 5/8 10-3/16
B-1748-24 1/4 male 7/16 10-3/16
B-1748-23 1/2 GAL. 1/2 male 5 5/8 11-1/16
B-1748-25 1/4 male 7/16 10-7/8
B-1748-19 9 OZ. 5/8-18 N.F.
for Remote
Mounting		 2- 7/8 5/8 5-1/2
B-1748-20 1 PINT 3-5/8 6-13/16
B-1748-21 1 QT. 10-3/16
B-1748-22 1/2 GAL. 5 11-1/16

* Smaller Capacities are Available on request

When Ordering Specify:
•Catalog Number

Specifications:

•Pressure...................................Atmospheric Pressure
                                                 Gravity Feed Only
                                                 Reservoir Vented
•Temperature.............................225º F. Max.
•Reservoir..................................Polycarbonate
•Seals.......................................Buna-N
•Mtg. Shank .............................Steel, Plated
•Covers.....................................Polypropylene


Style D



                 
            Pipe Mounting                                      Remote Mounting



Catalog Number Capacity NPT A D C
Acrylic Pyrex
B-966-9 B-966-59 9 OZ. 1/4 male 3 5-5/16 7/16
B-966-10 B-966-60 3/8 male 5-3/8 1/2
B-966-11 B-966-61 1/2 male 5-5/16 5/8
B-966-12 B-966-62 1 PINT 1/4 male 3-1/2 6-5/16 7/16
B-966-13 B-966-63 3/8 male 6-3/8 1/2
B-966-14 B-966-64 1/2 male 6-5/16 5/8
B-966-15 B-966-65 1 QT. 1/2 male 4-1/4 7-11/16
B-966-16 B-966-66 1/2 GAL. 5-1/2 9-3/4
B-966-17 ---------- 1 GAL. 14-3/4
B-966-21 B-966-72 9 OZ. 5/8-18 N.F
for Remote
Mounting		 3 5-5/16 5/8
B-966-22 B-966-72 1 PINT 3-1/2 6-5/16
B-966-23 B-966-73 1 QT. 4-1/4 7-11/16
B-966-24 B-966-74 1/2 GAL. 5-1/2 9-3/4
B-966-25 ----------- 1 GAL. 5-1/2 14-3/4

*Smaller Capacities are Available on request.

When Ordering Specify:
•Catalog Number

Specifications:
•Pressure.................................Atmospheric Pressure
                                               Gravity Feed Only
                                               Reservoir Vented
•Temperature............................225º F. Max Pyrex
                                               160º F. Max. Acrylic
•Reservoir.................................Acrylic or Pyrex
•Seals......................................Buna-N
•Mtg. Shank ............................Steel, Plated
•Covers....................................Aluminum Alloy



TEN OUNCE RESERVOIR


The Ten Ounce Reservoir Assembly dispenses liquid, by gravity.  This reservoir is injection molded polycarbonate and the enclosure cap is injection molded polypropylene.  This reservoir is ideal for many applications.  As an oil cup, it can be directly mounted to bearing housing, gear box, transmission, etc.  It can also be assembled with a remote mounting shank, allowing for the reservoir to be mounted away from the point of application.  The polycarbonate reservoir is transparent, allowing for visual inspection of contents, and is compatible with a wide range of fluids.  It will tolerate temperature changes from minus 40º F. to maximum of 150º F. without any significant dimensional changes.  It is shatterproof, making it well suited for rugged industrial application, as well as areas where glass is not permitted.




Catalog Number Capacity Thread Size A C
With Filter Without Filter
A-5409-1 A-5409-2 10 oz. 1/4 male NPT 2-7/8 5-9/16
Also available in Remote Mounting

When Ordering Specify:
•Catalog Number

Specifications:
•Pressure............................Atmospheric Pressure
•Temperature.......................150º F. Maximum
•Reservoir............................Polycarbonate
•Seals.................................Viton®
•Mtg. Shank .......................Steel, Plated
•Cover.................................Polypropylene

Viton® is a registered trademark of Dupont Dow Corp.

 
 

Reservoir with Filter and Low Level Sensor

 

Reservoir with Filter and Low Level Sensor dispenses liquid, by gravity, from a reservoir and are furnished without shutoff or control valves.  These dispensers are designed to serve as a central reservoir of an oiling system.  Shutoff valves and additional sight feed valves are needed for the regulation of liquid flow.  Durable, shatterproof acrylic reservoirs are for temperatures below 160º F.  Crystal clear pyrex or acrylic reservoirs are available for temperatures below 225º F.  They are also useful for many applications where it is desirable to visually inspect the presence and clarity of the liquid.  Self-closing filler caps are also provided.



                   

            Pipe Mounting                                         Remote Mounting

Catalog Number Capacity Thread Size A C
Acrylic Pyrex
*B-3177-2 B-3177-52 1 QT. 3/8 male NPT 4-1/4 7-3/4
*B-3177-3 B-3177-53 1 QT. 1/2 male NPT 4-1/4 7-3/4
B-3177-7 B-3177-57 1/2 GAL. 1/2 male NPT 5-1/2 9-13/16
B-3177-11 ----------- 1 GAL. 1/2 male NPT 5-1/2 14-13/16
*B-3177-13 B-3177-63 1 QT. 5/8-18 U.N.F. for
remote mtg.  with 1/8
female NPT outlet		 4-1/4 7-3/4
B-3177-14 B-3177-64 1/2 GAL. 5-1/2 9-13/16
B-3177-15 ------------ 1 GAL. 5-1/2 14-13/16

* Special - Please Consult Factory

When Ordering Specify:
•Catalog Number

Specifications:
•Pressure........................................Atmospheric Pressure
•Temperature...................................225º F. Max. Pyrex
                                                      160º F. Max. Acrylic
•Reservoir........................................Acrylic or Pyrex
•Seals.............................................Buna-N
•Low Level Switch ...........................Polypropylene
•Filter.............................................100 Mesh
•Covers...........................................Aluminum Alloy

 
 

Polycarbonate Bottles

Polycarbonate Bottles are fully transparent, sturdy, with rigid walls, almost indestructible, stain-resistant, and have a chemical resistance to wide range of fluids.  They can be used for a multitude of applications such as containers for storage, laboratory experiments, shipping parts of liquids and oil dispensing reservoirs.  The bottles are also ideal for retaining samples of chemical or medical products.  The bottles possess good fire resistant properties.  They will permit the use of conventional marking or identifying techniques such as adhesive labels, silk screening, printing marker, etc.  The enclosure caps used are made of ultraviolet stabilized polypropylene, a material which matches the polycarbonate bottles in mechanical, thermal and chemical resistance to fluids.  A large opening in the bottle simplifies filling and emptying without spillage.  The shape of the bottle is such that it can be held securely even when wet to unscrew the enclosure.

 

Style DT

 

Catalog Number

Capacity

A

C

A-4615-1

1 OZ.

2

2-1/16

A-4615-2

2-1/2 OZ.

3-1/16

A-4615-3

5 OZ.

2-7/8

3

A-4615-4

9 OZ.

4-1/4

A-4615-5

1 PT.

3-5/8

5-1/4

A-4615-6

1 QT.

8-5/8

A-4615-7

1/2 GAL.

5

9-3/8

When Ordering Specify:
•Catalog Number

Specifications:
•Pressure.........................................15 P.S.I. Max.
•Temperature....................................225º F. Max
•Gasket............................................Buna-N
•Cover...............................................Polypropylene
•Reservoir..........................................Polycarbonate


RETURN TO TOP                                                                           GO BACK TO LUBRICATORS