Built to give long, trouble free service, constant level lubricators will maintain a fixed liquid level in a bearing housing or gearbox. When the liquid in the bearing recedes because of liquid consumption, the liquid seal on the inside of the lubricator is temporarily broken. This allows air from the air intake to enter the lubricator reservoir, releasing the liquid until a seal and proper level are again established. The Style CS Constant Level Oiler is identical in design to Style C with two exceptions. A large sight for viewing the liquid level and condition of the liquid is provided, plus there are larger liquid outlets for rugged, heavy duty installations.
Style
C
Style CS
| Catalog No. Style C |
Catalog No. Style CS |
Capacity | A | B Style C |
B Style CS |
| B-518-1 | B-576-1 | 2-1/2 oz. | 2 | 5-3/16 | 5-1/4 |
| B-518-2 | B-576-2 | 5 oz. | 2-1/2 | 5-11/16 | 5-3/4 |
| B-518-3 | B-576-3 | 9 oz. | 3 | 6-1/2 | 6-9/16 |
| B-518-4 | B-576-4 | 1 pt. | 3-1/2 | 7-1/2 | 7-9/16 |
| B-518-5 | B-576-5 | 1 qt. | 4-1/4 | 8-3/4 | 8-13/16 |
| B-518-6 | B-576-6 | 1/2 gal. | 5-1/2 | 10-3/4 | 10-13/16 |
Specifications:
•Pressure.................................Atmospheric Pressure / Equalized with housing
•Temperature............................160º F. Maximum Acrylic
225º F. Maximum Glass
•Reservoir.................................Clear Acrylic (Glass Available)
•Seals......................................Buna-N
•Sight......................................Glass
•Covers....................................Aluminum Alloy
•Body......................................Aluminum
Alloy
These oilers dispense oil by gravity from a reservoir through an adjustable needle
valve. Available with manual or electro shutoff. Simple, yet efficient, this unit allows a
controlled feed rate which is observed through the lower sight chamber. Flow is controlled by either
the manual shutoff or by wiring the normally closed solenoid valve across the line of the drive
motor, providing automatic operation. Reservoirs are rugged, high temperature transparent
plastic.This permits a continuous visual check of the oil supply.
Style DE (Electro)
| Catalog No. Style DE |
Catalog No. Style DOSF |
Capacity |
Male N.P.T. |
A |
Electro DE |
Manual DOSF |
| B-1763-2 | B-1681-2 | 1 oz. | 1/4 | 2 | 5-1/4 | 4-3/4 |
| B-1763-5 | B-1681-5 | 2-1/2 oz. | 3/8 | 2 | 6-3/8 | 5-7/8 |
| B-1763-7 | B-1681-7 | 5 oz. | 1/4 | 2-7/8 | 6-1/4 | 5-3/4 |
| B-1763-10 | B-1681-10 | 9 oz. | 3/8 | 2-7/8 | 7-5/8 | 7-1/8 |
| B-1764-3 | B-1682-3 | 1 pt. | 1/2 | 3-5/8 | 9-1/16 | 8-9/16 |
| B-1764-4 | B-1682-4 | 1 qt. | 1/2 | 3-5/8 | 12-7/8 | 11-15/16 |
| B-1764-7 | B-1682-7 | 1/2 gal. | 1/2 | 5 | 13-5/16 | 12-13/16 |
When Ordering Specify:
•Catalog No.
•Voltage & Frequency
Specifications:
•Pressure..........................Atmospheric / Head Pressure (Reservoir is vented)
•Temperature.....................225ºF. Max.
•Metering..........................Adjustable Needle Valve
Solenoid Shut-off
Toggle Shut-off
Full Flow Lubricators are designed to serve as a central reservoir of an oiling system. Additional sight feed valves are needed for the regulation of oil flow, available with manual of electro shutoff. Flow is controlled by either the manual shutoff or a normally closed solenoid valve, wired across the line of drive motor, providing automatic shutoff. Reservoirs are rugged, high temperature, transparent plastic. This permits a continuous visual check of the oil supply. A self-closing filler cap is provided on top of the reservoir.
Style DFF (Manual) 
Style DEF (Electro)
| Catalog No. Style DEF |
Catalog No. Style DFF |
Capacity | A | B |
| B-1733-1 | B-1734-1 | 1oz. | 2 | 4-3/16 |
| B-1733-2 | B-1734-2 | 2-1/2 oz. | 2 | 5-3/16 |
| B-1733-3 | B-1734-3 | 5 oz. | 2-7/8 | 5-1/8 |
| B-1733-4 | B-1734-4 | 9 oz. | 2-7/8 | 6-3/8 |
| B-1733-5 | B-1734-5 | 1 pt. | 3-5/8 | 7-11/16 |
| B-1733-6 | B-1734-6 | 1 qt. | 3-5/8 | 11-1/16 |
| B-1733-7 | B-1734-7 | 1/2 gal. | 5 | 11-15/16 |
Specifications:
•Pressure...........................Atmospheric / Head Pressure (Reservoir is vented)
•Temperature......................160º F. Max. Acrylic
225º F. Max. Pyrex or Polycarbonate
•Metering............................Full Flow
Solenoid Shut-off
Toggle Shut-off
•Port..................................1/4 Dia.
•Reservoir...........................Acrylic, Polycarbonate or Pyrex
•Seal..................................Buna-N
•Shank...............................Aluminum Alloy
Multiple Feed Lubricators are designed to release oil from a Centralized Dispenser through the new modular multiple needle valves. These systems supply oil to widely separated points. They are controlled, observed and filled from one central station. The revolutionary principle regarding assembly allows the option of changing the units in the field by merely stacking them together eliminating the old costly tie-rod and manifold method. Central dispensers can be equipped with 2 to 24 sight feed valves. Each feed valve can be separately adjusted and the setting retained. Manual and solenoid controlled models are available.
Style DE (Electro) 
Style DM (Manual)
| Catalog No. Style DE |
Catalog No. Style DM |
Capacity | A | B |
| B-3192-2 | B-3193-2 | 9 oz. | 2-7/8 | 9-1/16 |
| B-3192-3 | B-3193-3 | 1 pt. | 3-5/8 | 10-1/16 |
| B-3192-4 | B-3193-4 | 1 qt. | 3-5/8 | 13-7/16 |
| B-3192-5 | B-3193-5 | 1/2 gal. | 5 | 14-1/8 |
Specifications:
•Pressure........................Atmospheric Pressure / Head Pressure (Reservoir is vented)
•Temperature...................225º F. Max.
•Metering........................Adjustable Needle Valve
Solenoid Shut-off
Toggle Shut-off
•Reservoir........................Polycarbonate
•Seal...............................Buna-N
•Valves............................Aluminum Alloy
•Sights............................Glass
•Body..............................Aluminum Alloy
| Feeds | L | M |
| 2 | 2 | 3-15/16 |
|
3 |
2-3/4 | 4-11/16 |
| 4 | 2-3/4 | 5-7/16 |
| 5 | 3-1/2 | 6-3/16 |
| 6 | 3-1/2 | 6-15/16 |
| 12 | 5-3/4 | 11-7/16 |
| 24 | 10-1/4 | 20-7/16 |